Pics Products Instructions

The Pics Water Bottle

Important: DO NOT DISCARD PLASTIC TEMPLATES. Save both plastic templates in the Picture Chamber. They are necessary to keep moisture from building up in the picture chamber.

Using your Pics Bottle™ for:

Photos
There are several ways to display photos in the Pics Bottle™. One easy way is to start out with an 8 x 10 photo and place the clear plastic template over the photo. The template is smaller than the photo so you will need to decide which part of the photo to use. Trace the shape of the template and cut the photo to the tracing.

Artwork
Place the clear plastic template over the artwork, trace the shape of the template with a pen or pencil and then cut the artwork to the shape of the template.

Fabric
Many people like to decorate their Pics Bottle™ using fabric. It’s simple: cut fabric to the shape of the template, You can monogram the fabric or stitch fabric for a quilt. Make a fashion statement!

Inserting and Removing your Photos and Artwork

1. Unscrew the bottom of the bottle with counter-clockwise turns. (illustration 1)

2. Pull out the entire plastic chamber; if chamber is hard to remove, simply rock it side to side as you pull down on the plastic chamber. (illustration 2)

3. Remove the paper insert and 2 plastic templates from the top of the clear plastic chamber o not discard them as they will be used.

4. Place one plastic template under your cut insert (photo, art, fabric) then place the other plastic template on top of your cut insert.

5. Roll the insert, with plastic templates, (illustration 3) making sure the top and bottom edges are straight and not sticking out of the plastic chamber.

6. Push the plastic chamber, with insert inside, (illustration 4) with force into the stainless steel bottle until there is no visible gap between the plastic chamber and the metal rim (illustration 5). While maintaining the force twist the plastic chamber 1/4 turn to the right and 1/4 turn to the left. (illustration 6) This is very important to maintain a waterproof seal.

7. Maintain the pushing force and screw the base on tightly.

You can change the photo or artwork as often as you like.

Please remember to grasp just one corner of the paper and pull it up as it will then be easy to remove.

We wish you many hours of happiness from both creating and drinking out of your Picture Water Bottle.

Safety Instructions

Please read the following safety and care instructions carefully:

• Wash the stainless steel inner cup, lid, and straw well with warm soapy water before using.
• Hand wash only; do not wash in a dishwasher.
• To maintain the cleanliness of the water bottle, routinely clean the inside of the lid.
• WARNING!!!! DO NOT PUT THIS BOTTLE INTO A MICROWAVE AS IT HAS STAINLESS STEEL AND MAY CAUSE A FIRE, ELECTRIC SHOCK, AND/OR RUIN THE MICROWAVE.

If you would like information about or would like to place an order for The Picture Water Bottle™, please .

top of page